TANK CLAD HS
PRODUCT DESCRIPTION:
Tank Clad HS is a VOC compliant, 80% solids epoxy coating formulated as an interior lining for pipes and tanks containing
potable water, wastewater, salt water, and other commodities. May
also be used as part of a system for tank exteriors.
Features:
- Chemical and abrasion resistant
- Direct to metal application
- Outstanding application properties
PRODUCT CHARACTERISTICS:
Finish: Semi-gloss
Color: Sanitary White, Light Blue
Volume Solids: 80% ± 2%, mixed
Weight Solids: 90% ± 2%, mixed
VOC (EPA Method 24): Unreduced <200 g/L; 1.67 lb/gal mixed
Reduced 10%: <240 g/L; 2.00 lb/gal
Mix Ratio: 2 component, premeasured 4:1
Theoretical Spreading Rate per coat:
| Minimum | Maximum | |
| Wet mils (microns) | 6.0 (150) | 10.0 (250) |
| Dry mils (microns) | 5.0 (125) | 8.0 (200) |
| ~Coverage sq ft/gal (sq m/L) | 160 (3.9) | 255 (6.2) |
Recommended Uses:
Lining system for the interior of steel tanks and concrete reservoirs
used for potable water. Meets requirements of AWWA C210 for
coating systems for the interior and exterior of steel water pipelines. Meets NSF Standard 61 requirements for use in potable
water storage tanks:
- 60,000 gallons and larger tanks with standard hardener
- 1,000 gallons and larger tank with low temp hardener
- > 30″ pipe with low temp hardener
- Acceptable for use with cathodic protection systems.
- Suitable for use in USDA inspected facilities
- Suitable for use in the Water & Wastewater Industry
- Conforms to AWWA D102 ICS #,1 #2,#3, and #5.***
*Note: For complete product information, please refer to Sherwin-Williams Product Page.
