Sherwin Williams SeaGuard 5000 HS

KEM 400 ENAMEL

PRODUCT DESCRIPTION:

Kem 400 Enamel is a general purpose, short oil alkyd, high gloss enamel. It is ideal for interior and exterior application for OEM finishing or refinishing of industrial, construction, and agricultural equipment as well as a wide array of general metal applications.

Features:

  • High Gloss
  • Good exterior color and gloss retention
  • Good one coat protection
  • Fast air drying
  • Good flexibility and film toughness
  • Available in a broad range of colors.
  • Ideal for large components because of longer open time and wet-in of overspray
  • Ideal system for horse trailers, farm, garden, and construction equipment and industrial machinery and equipment

PRODUCT CHARACTERISTICS:

Finish: High Gloss 85+ units (60°)

Volume Solids: 27-36 ± 2% may vary by color

Viscosity: 50-60 seconds #2 Zahn Cup, 40-50 seconds #4 Ford Cup
Blending Clear (F75V405) 82-90 KU
Tinting Clear (F75V421) 82-90 KU

 

Theoretical Spreading Rate per coat:

 

Minimum Maximum
Wet mils (microns) 3.5 5.0
Dry mils (microns) 1.0 1.5
~Coverage sq ft/gal 290 580

 

*Note: For complete product information, please refer to Sherwin-Williams Product Page.

RECOMMENDED PRODUCT FOR SURFACE PREPARATION

HoldTight® 102

hold tight surface preparation

HoldTight® 102 completely removes all salts, resulting in no conductivity. It also removes abrasives and debris from the surface’s profile providing a better surface area to bond with coating.

HoldTight® 102 is the perfect surface preparation solution for industrial environments with steel and concrete surfaces, including but not limited to:

  • Sewer collection systems
  • Wastewater treatment plants
  • Water towers
  • Industrial treatment plants
  • Industrial tankage

HoldTight® leaves a clean surface up to 72 hours. Large areas of structures can be blasted and cleaned completely before coating application, instead of having to be coated immediately after blasting every day.

HoldTight® 102 can be worked into any blasting process to achieve a totally clean surface, with zero flash-rust and zero residue left behind. HoldTight® is a clear, simple additive with visible results, eliminating both natural and artificial contaminants. At sea HoldTight® 102 is safe to use and compatible with a wide variety of surfaces, including steel, concrete, fiberglass, aluminum, composites, and more!

FIND A DISTRIBUTOR