Sherwin Williams SeaGuard 5000 HS

FIRETEX M90/02

PRODUCT DESCRIPTION:

FIRETEX M90/02 is a solvent free thick film epoxy intumescent coating. It is a durable, epoxy fire protection product that is solvent free and fast curing, with fire protection for up to 3.5 hours on structural steel, decks and bulkheads. FIRETEX M90/02 is also tested for jet fire situations.

Features:

  • It has resistance to the following:
    • Moisture
    • Acid spillage
    • Alkali spillage
    • Petroleum solvents
    • Aliphatic solvents
    • Abrasion
    • Weather

PRODUCT CHARACTERISTICS:

Color: Pale Blue (white base plus blue additive)

Volume Solids: 100%, mixed

VOC (EPA Method 24): 0.0 g/L; 0.0 lb/gal

Typical Thickness: Contact your Sherwin-Williams representative

Theoretical Spreading Rate per coat:
Minimum Maximum
Wet mils (microns) 200.00 (5000) 200.00 (5000)
Dry mils (microns) 200.00 (5000) 200.00 (5000)
~Coverage sq ft/gal (sq m/L) 8.1 (0.2) 8.1 (0.2)

Recommended Uses:

As a thick film exterior durable intumescent coating for the
treatment of offshore structures and other steelwork requiring fire
protection, especially to Hydrocarbon and Jet fires.

*Note: For complete product information, please refer to Sherwin-Williams Product Page.

RECOMMENDED PRODUCT FOR SURFACE PREPARATION

HoldTight® 102

hold tight surface preparation

HoldTight® 102 completely removes all salts, resulting in no conductivity. It also removes abrasives and debris from the surface’s profile providing a better surface area to bond with coating.

HoldTight® 102 is the perfect surface preparation solution for industrial environments with steel and concrete surfaces, including but not limited to:

  • Sewer collection systems
  • Wastewater treatment plants
  • Water towers
  • Industrial treatment plants
  • Industrial tankage

HoldTight® leaves a clean surface up to 72 hours. Large areas of structures can be blasted and cleaned completely before coating application, instead of having to be coated immediately after blasting every day.

HoldTight® 102 can be worked into any blasting process to achieve a totally clean surface, with zero flash-rust and zero residue left behind. HoldTight® is a clear, simple additive with visible results, eliminating both natural and artificial contaminants. At sea HoldTight® 102 is safe to use and compatible with a wide variety of surfaces, including steel, concrete, fiberglass, aluminum, composites, and more!

FIND A DISTRIBUTOR