EURONAVY ES301K
PRODUCT DESCRIPTION:
Euronavy ES301K is a solvent-free, surface and humidity tolerant two-pack modified epoxy. It can be applied without dew point restrictions and over damp steel surfaces. Euronavy ES301K shows good chemical and abrasion resistance and good edge-retentive properties. It can be applied over steel prepared by hydroblasting, grit blasting or mechanical tooling.
Features:
- Excellent edge retention (when used with ES301S)
- No dew point or relative humidity restrictions
- Excellent anticorrosive properties
- Can be applied over damp substrates
- Can be applied over medium flash rust
- Excellent substrate and intercoat adhesion
PRODUCT CHARACTERISTICS:
Finish: Semi-Gloss
Color: Red Oxide, Moss Green, Light Gray, White, Haze Gray, Black
Volume Solids: 97 ± 3%
Weight Solids: 98 ± 2%
VOC (EPA Method 24): <150 g/L ; 1.25 lb/gal
Mix Ratio: 4:1, by volume
Theoretical Spreading Rate per coat:
| Minimum | Maximum | |
| Wet mils (microns) | 4.0 (100) | 6.0 (150) |
| Dry mils (microns) | 4.0 (100) | 6.0 (150) |
| ~Coverage sq ft/gal (sq m/L) | 267.0 (6.7) | 401.0 (10.0) |
Recommended Uses:
EURONAVY ES301K is an anticorrosive coating for long service life steel protection. It can be used for both immersion and above the waterline service in marine, off shore, construction and industrial applications. It is suitable for new building, conversion, repair or maintenance applications. It provides superior performance protecting areas such as ballast tanks, void tanks, crude oil tanks, slop tanks, mud pits, wet spaces, bilges, decks, external hull and steel bridges.
Suitable for use in USDA Inspected Facilities.
*Note: For complete product information, please refer to Sherwin-Williams Product Page.
