Sherwin Williams SeaGuard 5000 HS

EPO-PHEN FF

PRODUCT DESCRIPTION:

Epo-Phen FF is a flake filled epoxy phenolic novolac lining for protection from corrosion under insulation.

PRODUCT CHARACTERISTICS:

Finish: Semi-Gloss

Color: Gray

Volume Solids: 70% ± 2%, mixed

VOC (EPA Method 24): <250 g/L; 2.08 lb/gal, mixed

Mix Ratio: 4:1 by volume

 

Theoretical Spreading Rate per coat:
Minimum Maximum
Wet mils (microns) 10.0 (250) 13.0 (325)
Dry mils (microns) 7.0 (175) 9.0* (225)
~Coverage sq ft/gal (sq m/L) 125.0 (3.0) 160.0 (3.9)

Recommended Uses:

External lining for steel and stainless steel tanks, pipes and process vessels under thermal insulation at elevated temperatures and/or cryogenic service. May be used as an API 652 compliant thin film lining for immersion service in crude/water service at elevated temperatures.

*Note: For complete product information, please refer to Sherwin-Williams Product Page.

RECOMMENDED PRODUCT FOR SURFACE PREPARATION

HoldTight® 102

hold tight surface preparation

HoldTight® 102 completely removes all salts, resulting in no conductivity. It also removes abrasives and debris from the surface’s profile providing a better surface area to bond with coating.

HoldTight® 102 is the perfect surface preparation solution for industrial environments with steel and concrete surfaces, including but not limited to:

  • Sewer collection systems
  • Wastewater treatment plants
  • Water towers
  • Industrial treatment plants
  • Industrial tankage

HoldTight® leaves a clean surface up to 72 hours. Large areas of structures can be blasted and cleaned completely before coating application, instead of having to be coated immediately after blasting every day.

HoldTight® 102 can be worked into any blasting process to achieve a totally clean surface, with zero flash-rust and zero residue left behind. HoldTight® is a clear, simple additive with visible results, eliminating both natural and artificial contaminants. At sea HoldTight® 102 is safe to use and compatible with a wide variety of surfaces, including steel, concrete, fiberglass, aluminum, composites, and more!

FIND A DISTRIBUTOR