DURA-PLATE 6100
PRODUCT DESCRIPTION:
Dura-Plate 6100 is a high build, high physical performance, 100% solids epoxy designed for corrosion protection of concrete and steel in municipal and industrial wastewater treatment facilities, especially where a high build and high physical value coating is required.
Features:
- 100% solids
- Resistant to water and wastewater treatment immersion
- Resistant to Sulfuric Acid formation caused by MIC in wastewater environments
- May be applied to an SSD (Saturated Surface Dry) substrate
- May be applied as a mortar system using type DP aggregate with no change in chemical resistance
PRODUCT CHARACTERISTICS:
Finish: Matte
Color: Off White
Volume Solids: 100%, mixed
Weight Solids: 100%, calculated mixed
VOC (measured): <10 g/L (EPA Method 24)
Mix Ratio: 2:1, mix by volume
Theoretical Spreading Rate per coat:
| Minimum | Maximum | |
| Wet mils (microns) | 12.0 (300) | 125.0 (3,125) |
| Dry mils (microns) | 12.0 (300) | 125.0 (3,125) |
| ~Coverage sq ft/gal (sq m/L) | 12.8.0 (0.3) | 133.6 (12.4) |
Recommended Uses:
Protects concrete and steel surfaces in immersion and atmospheric exposure. Ideally suited for coating, lining, and containment applications in water and wastewater facilities including:
- Lift stations
- Influent chambers
- Manholes
- Pipes
- Sumps
- Clarifiers
- Digesters
- Trenches
- Wet wells
- Sluice ways
- Basins
*Note: For complete product information, please refer to Sherwin-Williams Product Page.
