DURA-PLATE 6000
PRODUCT DESCRIPTION:
Dura-Plate 6000 is a 100% solids, high build, high strength, reinforced epoxy lining for concrete and steel in severe service environments with fast return-to-service times and the option for single leg application. It eliminates the application challenges associated with standard reinforced epoxy products while providing long-term life expectancy with extremely low permeability and excellent chemical resistance.
Features:
- Glass flake reinforced
- Hangs up to 125+ mils (3,125 microns)
- Single leg or plural component spray application
- Long pot life
- Extended 21 day re-coat window
- Return to service in 10 hours
- Extremely low permeability
- May be applied to an SSD (Saturated Surface Dry) substrate
PRODUCT CHARACTERISTICS:
Finish: Gloss
Color: White, Gray
Volume Solids: 100%, mixed
Weight Solids: 100%, mixed
VOC (unreduced): 16 g/L ; 0.13 lb/gal
Mix Ratio: 2:1 by volume
Theoretical Spreading Rate per coat:
| Minimum | Maximum | |
| Wet mils (microns) | 20.0 (500) | 125.0+ (3,125) |
| Dry mils (microns) | 20.0 (500) | 125.0+ (3,125) |
| ~Coverage sq ft/gal (sq m/L) | 13.0 (0.3) | 80.0 (2.0) |
Recommended Uses:
For use over properly prepared steel and concrete surfaces in industrial environments and water and wastewater exposures, such as but not limited to:
- Severe wastewater immersion and headspace environments
- Sewer collection systems
- Wastewater treatment plants
- Industrial and wastewater tankage
- Suitable for use in USDA-inspected food processing facilities
*Note: For complete product information, please refer to Sherwin-Williams Product Page.
