COROTHANE I ALIPHATIC FINISH
PRODUCT DESCRIPTION:
Corothane 1 Aliphatic Finish Coat is a single component, moisture curing urethane designed for low temperature or high humidity applications while providing UV resistance and chemical resistance equivalent to two part urethane coatings.
Features:
- Low temperature application – down to 20°F (-7°C)
- Excellent resistance to yellowing, chalking, or degradation by sunlight
- Excellent adhesion to most surfaces
- Superior abrasion resistance
- Excellent adhesion directly to clean concrete
- Outstanding chemical resistance
- Outstanding application properties
PRODUCT CHARACTERISTICS:
Finish: Gloss
Color: Wide range of colors available
Volume Solids: 52% ± 2%, may vary by color
Weight Solids: 100%, mixed
VOC (calculated): <420 g/L; 3.5 lb/gal
Theoretical Spreading Rate per coat:
| Minimum | Maximum | |
| Wet mils (microns) | 4.0 (100) | 6.0 (150) |
| Dry mils (microns) | 2.0 (50) | 3.0 (75) |
| ~Coverage sq ft/gal (sq m/L) | 278.0 (6.8) | 417.0 (10.2) |
Recommended Uses:
For use over properly prepared steel and concrete surfaces in industrial environments and water and wastewater exposures, such as but not limited to:
- Color coat for where maximum color and gloss retention are required
- Chemical resistant coating for metalized surfaces and tanks
- Chemical resistant floor coating
- Marine applications
- Suitable for use in USDA inspected facilities
- White and light colors meet requirements of SSPC Paint 38, Level III
- Conforms to AWWA D102 OCS #2
*Note: For complete product information, please refer to Sherwin-Williams Product Page.
