ACROLON 218 HS
PRODUCT DESCRIPTION:
Acrolon 218 HS is a polyester modified, aliphatic, acrylic polyurethane formulated specifically for in-shop applications. Also suitable for industrial applications. A fast drying, urethane that provides color and gloss retention for exterior exposure
PRODUCT CHARACTERISTICS:
Finish: Gloss or Semi-Gloss
Color: Wide range of colors possible
Volume Solids: 65% ± 2%, mixed, may vary by color
Weight Solids: 78% ± 2%, mixed, may vary by color
VOC (EPA Method 24): Unreduced: <300 g/L; 2.5 lb/gal
mixed Reduced 10% with R7K15: <340 g/L; 2.8 lb/gal
mixed Reduced 9% with MEK, R6K10: <340 g/L; 2.8 lb/gal
Mix Ratio: 6:1 by volume, 1 gallon or 5 gallon mixes
premeasured components
Theoretical Spreading Rate per coat:
| Minimum | Maximum | |
| Wet mils (microns) | 4.5(112.5) | 9.0 (225) |
| Dry mils (microns) | 3.0 (75) | 6.0 (150) |
| ~Coverage sq ft/gal (sq m/L) | 175 (4.3) | 346 (8.5) |
Recommended Uses:
Specifically formulated for in-shop applications.
- For use over prepared metal and masonry surfaces in industrial environments such as:
• Structural steel
• Tank exteriors
• Rail cars and locomotives
• Pipelines
• Conveyors
• Ships
• Bridges - Wind Towers – onshore and off shore
- Off shore platforms – exploration and production
- Suitable for use in USDA inspected facilities
- Conforms to AWWA D102 Outside Coating Systems #4 (OCS-4), #5 (OCS-5) & #6 (OCS-6)
- Acceptable for use in high performance architectural applications
- Acceptable for use over and/or under Loxon S1 and Loxon H1 Caulking
- A component of INFINITANK
- Over FIRETEX® hydrocarbon systems
- Suitable for use in the Mining & Minerals Industry
*Note: For complete product information, please refer to Sherwin-Williams Product Page.
