Sherwin Williams SeaGuard 5000 HS

SHER-LOXANE 800

PRODUCT DESCRIPTION:

Sher-Loxane 800 is a versatile, high performance, two component polysiloxane (epoxy siloxane hybrid) that combines the properties of both a high performance epoxy and a polyurethane.

PRODUCT CHARACTERISTICS:

Finish: Gloss or Semi-Gloss

Color: Wide range of colors possible

Volume Solids: 65% ± 2%, mixed, may vary by color

Weight Solids: 78% ± 2%, mixed, may vary by color

VOC (EPA Method 24): <100 g/L; 0.77 lb/gal 12gms/kilo*
*content by weight from formulation, to satisfy EC Solvent Emissions Directive

Mix Ratio: 4:1 by volume

 

Theoretical Spreading Rate per coat:
Minimum Maximum
Wet mils (microns) 4.5(112.5) 9.0 (225)
Dry mils (microns) 3.0 (75) 6.0 (150)
~Coverage sq ft/gal (sq m/L) 175 (4.3) 346 (8.5)

Recommended Uses:

  • On new construction, repair and field maintenance coating projects.
  • It provides effective long-term corrosion control and weatherability.
  • Can be applied directly over inorganic zincs
  • <100 g/L VOC, no isocyanates
  • 20°F (-5°C) cure

*Note: For complete product information, please refer to Sherwin-Williams Product Page.

RECOMMENDED PRODUCT FOR SURFACE PREPARATION

HoldTight® 102

hold tight surface preparation

HoldTight® 102 completely removes all salts, resulting in no conductivity. It also removes abrasives and debris from the surface’s profile providing a better surface area to bond with coating.

HoldTight® 102 is the perfect surface preparation solution for industrial environments with steel and concrete surfaces, including but not limited to:

  • Sewer collection systems
  • Wastewater treatment plants
  • Water towers
  • Industrial treatment plants
  • Industrial tankage

HoldTight® leaves a clean surface up to 72 hours. Large areas of structures can be blasted and cleaned completely before coating application, instead of having to be coated immediately after blasting every day.

HoldTight® 102 can be worked into any blasting process to achieve a totally clean surface, with zero flash-rust and zero residue left behind. HoldTight® is a clear, simple additive with visible results, eliminating both natural and artificial contaminants. At sea HoldTight® 102 is safe to use and compatible with a wide variety of surfaces, including steel, concrete, fiberglass, aluminum, composites, and more!

FIND A DISTRIBUTOR