SEAGUARD 6000 Marine Epoxy
PRODUCT DESCRIPTION:
SeaGuard 6000 Marine Epoxy is a modified epoxy phenalkamine, formulated specifically for immersion and atmospheric service in marine and industrial environments. SeaGuard 6000 is a versatile anti-corrosive coating that can be applied at temperatures as low as 20°F/-7°C.
Features:
- Self-priming
- Low temperature application
- Surface tolerant – damp surfaces
- Provides salt water and fresh water immersion resistance
PRODUCT CHARACTERISTICS:
Finish: Low Sheen
Color: Red Oxide, Gray, Off-White, Black, Buff, Aluminum, Bronze Tone
Volume Solids: 67% ± 2%, mixed
Weight Solids: 80% ± 2%, mixed
VOC (EPA Method 24):
Unreduced: <300 g/L; 2.50 lb/gal
Reduced 10%: <340 g/L; 2.80 lb/gal
Mix Ratio: 4:1 by volume (2 component)
Recommended Spreading Rate per coat:
| Minimum | Maximum | |
| Wet mils (microns) | 8.0 (200) | 11.0 (275) |
| Dry mils (microns) | 5.0 (125) | 7.0 (175) |
| ~Coverage sq ft/gal (sq m/L) | 154 (3.8) | 215 (5.3) |
| Theoretical coverage sq ft/gal (sq m/L) @ 1 mil / 25 microns dft |
1072 (26.2) | |
Recommended Uses:
SeaGuard 6000 is for use over properly prepared steel substrates, including:
- Salt water and fresh water immersion service
- Ballast tanks
- Offshore and marine structures
- Bilges and wet void areas
- Decks and superstructures
- Underwater hulls
- Fabrication and new construction
- Maintenance and repair
- As an anti-corrosive primer when used as part of an underwater hull system with anti-fouling coatings
- Immersion service in wastewater treatment plants
*Note: For complete product information, please refer to Sherwin-Williams Product Page.
