Sherwin Williams SeaGuard 5000 HS

MACROPOXY 240

PRODUCT DESCRIPTION:

Macropoxy 240 is an epoxy polyamide primer designed specifically for immersion service under immersion grade epoxies and polyureas. It is a fast drying coating with an extended recoatability.

PRODUCT CHARACTERISTICS:

Finish: Flat
Color: Red Oxide, Gold, Buff and Gray
Volume Solids: 72% ± 2%, mixed (ASTM-D2697-91)
VOC (EPA Method 24): <240 g/L; 2.0 lb/gal unreduced
Mix Ratio: 1:1 by volume

 

Theoretical Spreading Rate per coat:
Minimum Maximum
Wet mils (microns) 4.5 (113) 7.0 (175)
Dry mils (microns) 3.0 (75) 5.0 (125)
~Coverage sq ft/gal (sq m/L) 250 (6.2) 375 (10.4)

Recommended Uses:

  • Acceptable for use as part of a system with cathodic protection systems
  • As a holding primer under laminate systems
  • Acceptable for use as a primer on prepared concrete
  • Suitable for use in the Mining & Minerals Industry
  • When an extended recoat window is required

*Note: For complete product information, please refer to Sherwin-Williams Product Page.

RECOMMENDED PRODUCT FOR SURFACE PREPARATION

HoldTight® 102

hold tight surface preparation

HoldTight® 102 completely removes all salts, resulting in no conductivity. It also removes abrasives and debris from the surface’s profile providing a better surface area to bond with coating.

HoldTight® 102 is the perfect surface preparation solution for industrial environments with steel and concrete surfaces, including but not limited to:

  • Sewer collection systems
  • Wastewater treatment plants
  • Water towers
  • Industrial treatment plants
  • Industrial tankage

HoldTight® leaves a clean surface up to 72 hours. Large areas of structures can be blasted and cleaned completely before coating application, instead of having to be coated immediately after blasting every day.

HoldTight® 102 can be worked into any blasting process to achieve a totally clean surface, with zero flash-rust and zero residue left behind. HoldTight® is a clear, simple additive with visible results, eliminating both natural and artificial contaminants. At sea HoldTight® 102 is safe to use and compatible with a wide variety of surfaces, including steel, concrete, fiberglass, aluminum, composites, and more!

FIND A DISTRIBUTOR