Sherwin Williams SeaGuard 5000 HS

KEM AQUA 50P Water Reducible

PRODUCT DESCRIPTION:

Kem Aqua 50P Water Reducible Primers are water reducible acrylic latex type primers designed for the general metal finishing markets.

Features:

  • Reduce and clean up with water
  • VOC** as packaged <2.1 lb/gal, 250 g/L less water and exempt solvents
  • Excellent adhesion to a wide range of structural foam plastics
  • Air dry or force dry
  • Single component, no catalyzation
  • Provides corrosion resistance to the system
  • Compatible topcoats include:
    Kem Aqua® 8530
    Kem Aqua® 600T W/R Enamel
    Polane® 700T W/R Enamel

PRODUCT CHARACTERISTICS:

Finish: Gloss 5-15 units (60°)

Volume Solids: 34 ± 2% may vary by color

Viscosity: 78-88 Krebs Units

 

Theoretical Spreading Rate per coat:

 

Minimum Maximum
Wet mils (microns) 3.7 4.4
Dry mils (microns) 1.25 1.5
~Coverage sq ft/gal 340 460

 

*Note: For complete product information, please refer to Sherwin-Williams Product Page.

RECOMMENDED PRODUCT FOR SURFACE PREPARATION

HoldTight® 102

hold tight surface preparation

HoldTight® 102 completely removes all salts, resulting in no conductivity. It also removes abrasives and debris from the surface’s profile providing a better surface area to bond with coating.

HoldTight® 102 is the perfect surface preparation solution for industrial environments with steel and concrete surfaces, including but not limited to:

  • Sewer collection systems
  • Wastewater treatment plants
  • Water towers
  • Industrial treatment plants
  • Industrial tankage

HoldTight® leaves a clean surface up to 72 hours. Large areas of structures can be blasted and cleaned completely before coating application, instead of having to be coated immediately after blasting every day.

HoldTight® 102 can be worked into any blasting process to achieve a totally clean surface, with zero flash-rust and zero residue left behind. HoldTight® is a clear, simple additive with visible results, eliminating both natural and artificial contaminants. At sea HoldTight® 102 is safe to use and compatible with a wide variety of surfaces, including steel, concrete, fiberglass, aluminum, composites, and more!

FIND A DISTRIBUTOR