HEAT-FLEX HI-TEMP 1200

PRODUCT DESCRIPTION:

Heat-Flex® Hi-Temp 1200 is the next generation single component inert multipolymeric matrix coating that outperforms alternatives in combating corrosion under insulation (CUI) and in high heat applications.

FEATURES:

• Resists corrosion under insulation
• Resists stress corrosion cracking
• Application surface temperatures from ambient to 500°F (260°C)
• Operating surface temperatures from -321°F (-196°C) to 1200°F (649°C)
• Self priming, single component
• No maximum recoat time
• Confirms to NACE SP0198:2017 CUI System CS-6 and SS-5

PRODUCT CHARACTERISTICS:

Finish: Low Sheen

Color: Gray and Dark Gray

Volume Solids: 57% ± 2% (calculated)

Weight Solids: 81% ± 2%

VOC (EPA Method 24): <375 g/L; 3.2 lb/gal

 

RECOMMENDED USES:

• Direct to steel or stainless steel
• As a coating under insulation
• Cyclic service up to 1200°F (649°C)
• For use over properly prepared steel surfaces, either insulated or uninsulated:
  • Power Plants
  • Refineries
  • Chemical Facilities
  • Off shore/Marine

*Note: For complete product information, please refer to Sherwin-Williams Product Page.

HoldTight® 102 completely removes all salts, resulting in no conductivity. It also removes abrasives and debris from the surface’s profile providing a better surface area to bond with coating. For marine vessels and equipment HoldTight® leaves a clean, rust-free surface for up to 72 hours, large areas of structures can be blasted and cleaned completely before coating application, instead of having to be coated immediately after blasting every day.

HoldTight® 102 can be worked into any blasting process to achieve a totally clean surface, with zero flash-rust and zero residue left behind. HoldTight® is a clear, simple additive with visible results, eliminating both natural and artificial contaminants. At sea HoldTight® 102 is safe to use and compatible with a wide variety of surfaces, including steel, concrete, fiberglass, aluminum, composites, and more!