Sherwin Williams SeaGuard 5000 HS

MACROPOXY 267

PRODUCT DESCRIPTION:

MACROPOXY 267 is a high solids 2-pack epoxy, pigmented with a high load of micaceous iron oxide (MIO) which exhibits excellent barrier protection. The high load flake ensures protection of sharp edges, corners, and welds. Ideal for maintenance painting and fabrication shop application. Can be applied directly to marginally prepared surfaces.

PRODUCT CHARACTERISTICS:

Finish: Flat

Color: Gray and Dark Gray

Volume Solids: 78% ± 3%, mixed (ASTM-D2697-91)

VOC (EPA method 24): Mixed:<250 g/L; 2.1 lb/gal

Mix Ratio: 4:1 by volume

 

Theoretical Spreading Rate per coat:
Minimum Maximum
Wet mils (microns) 5.0 (125) 7.5 (188)
Dry mils (microns) 4.0 (100) 6.0 (150)
~Coverage sq ft/gal (sq m/L) 208.0 (5.2) 312.0 (7.8)

Recommended Uses:

An intermediate coat in multicoat systems for atmospheric exposure in marine and heavy industrial environments

*Note: For complete product information, please refer to Sherwin-Williams Product Page.

RECOMMENDED PRODUCT FOR SURFACE PREPARATION

HoldTight® 102

hold tight surface preparation

HoldTight® 102 completely removes all salts, resulting in no conductivity. It also removes abrasives and debris from the surface’s profile providing a better surface area to bond with coating.

HoldTight® 102 is the perfect surface preparation solution for industrial environments with steel and concrete surfaces, including but not limited to:

  • Sewer collection systems
  • Wastewater treatment plants
  • Water towers
  • Industrial treatment plants
  • Industrial tankage

HoldTight® leaves a clean surface up to 72 hours. Large areas of structures can be blasted and cleaned completely before coating application, instead of having to be coated immediately after blasting every day.

HoldTight® 102 can be worked into any blasting process to achieve a totally clean surface, with zero flash-rust and zero residue left behind. HoldTight® is a clear, simple additive with visible results, eliminating both natural and artificial contaminants. At sea HoldTight® 102 is safe to use and compatible with a wide variety of surfaces, including steel, concrete, fiberglass, aluminum, composites, and more!

FIND A DISTRIBUTOR