SEAGUARD 5000 HS EPOXY
PRODUCT DESCRIPTION:
Seaguard 5000 HS Epoxy is a high performance and high solids, polyamine cured epoxy that is designed to be used as a part of an anticorrosive system for marine applications, or as a lining system for fuel, brine, ballast and non-potable water tanks
Features:
- Complies with IMO Performance Standard for Protective Coatings SOLAS REGULATIONS II-1/3-2 and XII/6.3
- Corrosion resistant
- Outstanding adhesion
- Qualified to MIL-PRF-24647 for underwater hull
- Qualified to MIL-PRF-23236 for ballast tanks and fuel tanks
PRODUCT CHARACTERISTICS:
Finish: Low Sheen
Color: Black, Off White, Red Deck, Green, Gray, Buff
Volume Solids: 73% ± 2% mixed
Weight Solids: 79% ± 2% mixed
VOC (EPA Method 24): <250 g/L; 2.08 lb/gal
Mix Ratio: 1:1 by volume (2 components)
Recommended Spreading Rate per coat:
| Minimum | Maximum | |
| Wet mils (microns) | 7.0 (175) | 10.0 (250) |
| Dry mils (microns) | 5.0 (125) | 7.0 (175) |
| ~Coverage sq ft/gal (sq m/L) | 167 (28.6) | 215 (5.7) |
| Theoretical coverage sq ft/gal (sq m/L) @ 1 mil / 25 microns dft |
1168(28.6) | |
Recommended Uses:
SeaGuard 6000 is for use over properly prepared steel substrates, including:
- Fuel, brine, ballast and non-potable water tanks
- Underwater hull with appropriate antifouling paint
- Interior or exterior marine applications
- Immersion service
- Acceptable for use with UHP / waterjetted substrates
*Note: For complete product information, please refer to sherwin-williams.com.
