POLANE T Polyurethane Enamel
PRODUCT DESCRIPTION:
Polane T Plus Polyurethane Enamel is a low gloss, two component coating meeting the strict EPA regulations for solvent emissions and meeting the high performance properties required by the business machine, computer and electronic enclosure industry. Polane T Plus coatings may be applied as low gloss, smooth or textured coating on
structural foam and injection molded plastics such as polycarbonate, ABS and polystyrene, SMC, wood and metal substrates.
Features:
- Meets EPA requirements of under 3.5 lb/gal VOC* catalyzed and reduced at the gun.
- Four hour working potlife
- High volume solids and spreading rate
- Outstanding physical and chemical
- Properties required by electronic cabinetry market
- Excellent hardness, adhesion and abrasion resistance
- May be applied with conventional spray equipment. Plural component equipment not required
- Air drying or force dry.
- A low energy cure system
- Available in a broad range of colors
- Direct adhesion to many plastic surfaces (see specifications column)
PRODUCT CHARACTERISTICS:
Finish: Gloss 15-20 units (60°)
Volume Solids: 52 ± 2% catalyzed and reduced may vary by color
Viscosity: 10-15 seconds #3 Zahn Cup, catalyzed and reduced
Mixing Ratio:
4 parts Polane T Plus
1 part Catalyst V66V47
1 part Reducer R7K74
Theoretical Spreading Rate per coat:
| Minimum | Maximum | |
| Wet mils (microns) | 3.0 | 4.0 |
| Dry mils (microns) | 1.5 | 2.0 |
| ~Coverage sq ft/gal | 420 | 555 |
*Note: For complete product information, please refer to sherwin-williams.com.
