POLANE 8910 Polyurethane Enamel
PRODUCT DESCRIPTION:
POLANE 8910 Polyurethane Enamel is a two component coating providing a full gloss range with excellent exterior durability and chemical resistance properties along with high volume solids and low VOC*.
Features:
- Excellent exterior color and gloss retention with V66V55 & V66V280 catalysts
- Very good combination of hardness and impact resistance
- Excellent exterior physical and chemical performance properties
- Excellent appearance over many types of metal and plastic substrate
- Excellent mar and abrasion resistance
- Air dry or force dry
- Available in a broad range of colors
- Formulated to meet 2.8 or 3.5 lbs/gal VOC regulations, depending on catalyst choice
- Ability to be applied as a textured coating
- Apply by conventional, airless, HVLP, electrostatic spray and air-assisted airless
PRODUCT CHARACTERISTICS:
Finish: Gloss
Volume Solids: 50 – 55 ± 2%, catalyzed & reduced, may vary by color
Viscosity: 18-27 secs., #2 Zahn Cup, catalyzed & reduced
Mix Ratio: 3:1
Theoretical Spreading Rate per coat:
Spreading Rate at 3.5 VOC at 1.5 mils DFT, no application loss, may vary by color
| Minimum | Maximum | |
| Wet mils (microns) | 3.0 | 4.0 |
| Dry mils (microns) | 1.5 | 2.0 |
| ~Coverage sq ft/gal | 535 | 590 |
*Note: For complete product information, please refer to Sherwin-Williams Product Page.
